V2 City Control Panels

£225.99£415.00

PRICES INCLUDE VAT
City & Heavy Control Panels

  • Ip Rated Waterproof Cases
  • 230v & 24V
  • Commercial and Domestic
  • LED Display
  • Self Learning
  • Pedestrian Entry Function
SKU: City Category: Tags: ,

Description

Keyfobs Advert

V2 City Control Panels – 230V & 24V

Control Panel for the Control of One or Two 230V or 24V Motors.

These Control Panels are a simple swap out replacement for your existing V2 Control Panel, so if you have a faulty panel you can just purchase a new one and swap it straight out.

Nothing complicated about it at all, just disconnect the connection blocks from the control panel, unscrew and remove the old panel and replace with the new, then connect the connection blocks.

A new panel may be needed due to water ingress or insect invasion which has caused a short which will burn out your old panel.

All of your motor settings are within the old control panel so the new panel will need to be re-commissioned.

V2 Underground Install

Control Panel Variations: Choose Above:

  • City 1 Evo – 230v , for use with 230v motors
    • Programming achieved using 3 program buttons and display 230V power supply for 2 single-phase motors equipped with ENCODER
    • Plug-in adapter for modular radio receiver MR2
    • Start, pedestrian start and stop controls from transmitter
    • Safety device test before any opening
    • 230V flashing light output (use flashing lights with intermittency)
    • Self-learning operating time function Obstacle detection function
    • Operational cycle counter, with programmable maintenance reminders
    • Leaf slow-down function in limit switch area to prevent noisy closures and rebounds
    • Slow start function during opening (programmable time)
    • Monitoring of input status using the display ADI 2.0 connector for the advanced management of the ADI devices
    • USB connector to connect the control unit to a PC and manage through software the programming of the unit, the firmware updates, and the operation diagnostics
    • Connector for the LOW ENERGY module that allows saving electrical energy: when the gate is standing the LOW ENERGY module deactivates the display, the photocells and all the devices power supplied by a terminal box
  • City 2+ – 230v , for use with 24v motors
    • Programmable using the on board display and 3 programming buttons
    • Comprehensive safety device inputs including two 8.2K resistive or mechanical edges
    • Emergency battery pack input
    • Optional encoder and limit management
    • Low voltage output for warning light or 24V flashing light
    • Compatible with the Eco-logic solar panel system
    • Plug in adaptor (MR2) for fixed rolling transmitters (up to 1008 codes)
    • Start, pedestrian start and stop controls from the transmitter
    • Auxiliary channel management from transmitter
    • Safety device test before any opening
    • Amperometric sensor obstacle detection function with programmable threshold
    • Operational cycle counter, with programmable maintenance reminders
    • Leaf slow-down function in limit switch area to prevent noisy closures and rebounds
  • Heavy1 – 230v Industrial Panel with Emergancy Stop
    • Programming achieved using 3 program buttons and display
    • Multilingual programming menu through 122×32 pixel graphic display
    • Power supply for 1x230V three-phase motor (delta connection)
    • Plug-in adaptor for modular radio receiver MR2
    • Input for connection of an encoder
    • Start control, pedal start, stop by transmitter
    • Three relay outputs programmable as lights, electrolock, warning light, electrobrake or functioning test 12Vdc
    • 230V flashing light output (use intermittent flashing light)
    • Test of safety devices before each opening
    • Precise adjustment of strength and speed during regular stroke and during slowdowns
    • Self-learning function of the stroke
    • Obstacle detection function through amperometric sensor
    • Operational cycle counter with programmable maintenance reminder
    • Monitoring of input status using the display
    • Available in version with only board or housed in a container (made of plastic or metal) with safety disconnecting switch and OPEN, CLOSE and EMERGENCY STOP buttons

Technical Data Downloads:

What You Get:

  • Control Panel with housing
  • Instructions

 

Panel Specs:

  • See individual panels above

Other Information:

  • These panels can be used with other motors of the same voltage and similar spec.

Next Day Delivery

Additional information

Weight12 kg
Dimensions40 × 30 × 20 cm
Voltage

230V, 24V

Kit Model

City, Heavy1

Reviews

There are no reviews yet.

Be the first to review “V2 City Control Panels”

Your email address will not be published.

You may also like…