FAAC 390 Kit

£800.40£1,455.60

Prices Include Vat

FAAC 390 Kits 24v & 230v – Single & Double Gates

Non reversing motors
Anti-crushing
24v & 230v
Option to add BUS XIB (24v)
Continuous Use (24v)
IP44 Rated

Clear

Description

Keyfobs Advert

FAAC 390 Articulated Arm Electric Gate Kit 24V & 230V

Electro-Mechanical Single Gate Kit & Double Gate Kit.

The Articulated Arm kit is the choice for large gate posts, like brick pillars, where rams will not fit.
for residential swing leaf gates with single-leaf max length of 1.8 m (3 m with electric lock), for bi-folding doors with 1.5 m maximum width of single panel.

FAAC 390 Motor Diagram

The Kit

These kits come in single (for one gate) or double (for a pair of gates) kits. These are either 230V or 24V Kits (choose options above).

This kit is supplied with UK mains 240v power direct to the control panel, with the 24v kits the panel then has a step down transformer which will transform the power supplied to both motors to 24v, this voltage is considered to be much safer than the 230v version for a number of reasons.

What you get:

The full kit comes with the following: Click the links for details and specifications.

  1. FAAC 390 24v or 230v Electro-mechanical Motor (either 1 or 2)
      1. Motors come complete with Articulated Arm  for Swing Gates.
  2. Gate Release Mechanism to each motor
  3. Release Keys (2)
  4. Control Panel (1)
    1. E124S – 24v Motors
    2. 455D – 230v Motors
  5. Safety Photocells (1 Pair)
    1. XP 20 D
  6. Receiver Card (1)
    1. XF868
  7. Keyfob Transmitters (2)
    1. XT2 – Standard
    2. XT4 – Upgrade

Kit Notes :

  • The system has non reversing motors that hold the gate in the open and closed positions.
  • The following is required for a two-leaf gate: two operators, two articulated arms and an electronic control unit 230v or control panel 24v.
  • IMPORTANT: The operator 390 must be provided with an articulated arm (swing leaf gate) or with a telescopic arm (for folding doors).

Kit Notes 24v:

  • Electronic control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle.
  • Emergency battery to ensure operation in case of powercut (optional).
  • Option to add BUS XIB interface to E024S or E124 control board for applications using NON BUS devices.
  • Due to 24V technology this operator will not overheat if used continuously

Kit Notes 230v:

  • Maximum anti-crushing safety thanks to an exclusive electronic device.
  • IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and the gate pier edge is max 300 mm.
  • The operator 390 can be equipped with a closing travel limit device and an opening travel limit device. 455D/E145 board must be used to control the travel limit device/s
  • For obstacle detection with E145 board use safety edges. For obstacle detection with 455D use safety edges.

FAAC 390 Tech Info

Optional Extras: Things to consider:

  • Intercom
    • This can be with or without keypad and either hardwired, digital wireless, wifi or GSM Satellite.
      • Intercoms need to be considered if you have no other way for people to indicate that they are at your property, as they may not be able to get to the door bell.
  • GSM Dialer
    • This wires to your control panel and when called by a phone will open the gates, can be more cost effective than many keyfobs.
  • Keypad
    • This allows you to give entry codes to people such as the gardener, postman, delivery drivers etc…
  • Push Button
    • This will allow people without a keyfob to let themselves out once they are locked in.
  • Loop Kit
    • This will automatically open the gates on approach by vehicles.
  • Timer
    • The timer allows you to run all or some of the above on a timed basis ie: you can shut off the push button operation between midnight and 7am.
  • Extra Photocells
    • The set you get with the gates go on the front of the gates and stop the gates from closing onto approaching cars while the gates are open, you may need a set of extra photocells for the inside to stop the gates from closing on a car trying to park if your drive is not a long one.
  • Safety Edges
    • These need to be considered on all possible crush points of the gate.
  • Locks
    • If your gate leafs are long or you have hydraulic none locking motors, you will need an electric lock for your gates.

These kits are available on next day delivery when ordered before 1 pm on weekdays, kits ordered on Friday will be delivered on Monday.

Next Day Delivery

Additional information

Weight32 kg
Kit Size

Double Kit (Pair), Single Kit

Voltage

230V, 24V

Reviews

There are no reviews yet.

Be the first to review “FAAC 390 Kit”

Your email address will not be published.

You may also like…